If you're running a car wash business, it's important to be aware of the effects hard water can have on your equipment and customers.

Hard water contains high levels of minerals, which can cause problems when when combined with presoaks and detergents. Today, we'll discuss the effects hard water can have on your car wash business and offer some tips for dealing with it.

What is Hard Water?

Hard water is water that contains a high concentration of calcium and magnesium. These minerals can cause problems when used with detergents, as they can bind to the detergent molecules and prevent them from being fully dissolved.

Water hardness varies depending on the geographical location. In general, hard water is more common in areas with high mineral content in the soil, such as the Southwestern United States.

What Causes Hard Water?

Water Hardness is caused by a high concentration of minerals or salt in the water supply. These deposits can come from a variety of sources, including:

• Dissolved limestone
• Magnesium sulfate
• Calcium carbonate
• Other minerals in smaller amounts

These minerals cause hard water and when they bind to detergent molecules, they prevent the detergent from being fully dissolved.

‍

Why is Hard Water a Problem?

Hard water is a problem because it leaves behind deposits on surfaces that it comes into contact with. These minerals can have multiple ill effects when it comes to washing cars.

For example, hard water can:

• Dull paint
• Etch glass
• Corrode metal
• Leave spots or streaks 
• Lower foaming capabilities
• Create soap scum
• Eventually clog pipes
• Affect self-serve equipment

This is why it's important to be aware of the hard water levels in your area and take steps to protect your car wash business from hard water problems.

Where is Water Hardness Common?

As we mentioned before, water hardness is more common in areas with high mineral contents in the soil. In the United States, this includes the Southwestern states as well as parts of the Midwest.

Some of the hardest water can be found in:

• Arizona
• California
• Colorado
• Idaho
• Kansas
• Montana

What is TDS or Total Dissolved Solids?

TDS is a measure of the total amount of dissolved minerals in water. The higher the TDS level, generally, the harder the water.

You can test the water hardness levels in your area with a TDS meter, which you can purchase online or at a hardware store. To get an accurate reading it's best to test the water at your car wash business, as water hardness levels can vary depending on the location.

What is The Difference Between Hard Water, Soft Water and High TDS Water?

The terms hard water, soft water and high TDS water are often used together, but there is a difference between the three.

• Hard water is water that contains a high concentration of calcium and magnesium.
• Soft water is water that has been treated to remove calcium and magnesium by replacing them with sodium.
• High TDS water is water that contains a high concentration of dissolved solids, but not necessarily calcium and magnesium. This means that soft water can still have a high TDS level if it contains other dissolved solids, such as sodium.

Does Hard Water Have Any Advantages?

In a car wash setting, hard water has no advantages. In fact, it can cause all sorts of problems for your business, from damaging equipment to leaving customers with subpar results.

If you have hard water, the best thing you can do is take steps to mitigate the effects.

How Do You Know if You Have Hard Water?

Water Hardness Test Kit

The best way to know if you have hard water would be to test the water with a hard water testing kit that can be found online, at your local hardware store, or your friendly car wash supplier.

To use a water hardness test kit, simply follow the instructions that come with the kit. In general, you'll add a sample of water to the test kit and then compare the results to a chart that comes with the kit.

Digital Hard Water Tester

Another way to test for hard water is to use a digital hard water tester. These testers are placed in the water and then give a reading of the hardness level.

By Eye

If you suspect you may have hard water and want a quick way to know before testing, look at your taps, shower heads or equipment.  If there is a white film or spots present then you likely have hard water. It is important to note that the varying degrees in hardness level may impact how visible it is on your taps.

Measures of Water Hardness

The standard guidelines in water classification include 0 to 60 mg/L of calcium carbonate as being soft. Water systems involving groundwater or well water often exceed 60 mg/L. This is because water travels through calcium carbonate deposits in rock or soil and becomes hard.

Hard water can range from being slightly hard to very hard, the degree of hardness is classified into different categories:

• Soft water contains up to 60 mg/L of calcium carbonate.
• Moderately hard water contains 61 to 120 mg/L of calcium carbonate.
• Hard water contains 121 to 180 mg/L of calcium carbonate.
• Very hard water contains more than 180 mg/L of calcium carbonate.

How Does Hard Water Affect Your Car Wash Business?

Hard water can affect your car wash greatly by impacting the quality of your wash and its ability to function.

The high calcium and magnesium concentrations in hard water can cause soap scum to build up on surfaces which can lead to equipment not functioning well. This leads to continuous (and more frequent) servicing.

Also, it can damage equipment by corroding metal or affecting the seals. This may cause a lower lifespan of your car wash's equipment. The American Water Works Association estimates it could affect the lifespan of equipment by as much as 30% in some cases.

Having problems with your equipment will increase downtime, cost money for repairs/replacements and leave cars improperly washed.

In addition to affecting your equipment, hard water prevents you from getting a great clean on vehicles. It leaves mineral deposits, spots and streaks on glass and paint, which will lead to unhappy customers.

Your car wash chemistry is also greatly affected by hard water. The hard water can bind with the detergent, making it less effective. This means you'll have to use more detergent or presoak to achieve the same level of clean. Costing you more money.

In addition it will also create a milky foam instead of rich suds, which does not clean as well.

All of these things can lead to a decrease in business and revenue. That's why it's important to take steps to protect your car wash from hard water.

‍

The Importance of Water to a Car Wash

Water is the most important part of any car wash business. It's what you use to clean the cars and it's also a big part of your operating costs. So, it's important to make sure that the water you're using is high quality.

We've discussed the importance of having soft water or low TDS water but that is not the only aspect of water that is vital for your wash.

Water temperature, pressure, volume and more all play a role in the quality of your wash.

An Aside On Water Heaters

Water heaters can be critical to a car wash in colder climates. Not only do they help to maintain water temperature but they can also provide extra pressure.

Hot water is important in a car wash because it helps to clean the cars better. The higher temperature helps to break down the dirt and grease on the car, making it easier to remove. It also helps to reduce the amount of time it takes to wash a car, which can be important for a business.

While most car washes use cold water, some businesses do offer hot water washes for an extra fee. If you operate in a climate where it gets cold, you may also want to consider using a water heater to maintain the water temperature from your water supply.

Water's importance cannot be understated, it is vital that you have a strong grasp over the water you use for your business.

How to Deal With Hard Water at Your Car Wash Business?

If your business only has access to hard water, there are a few things you can do to ensure your water is clean and primed for car wash success.

Use a Water Softener:

A water softener is a device that removes calcium and magnesium from water, making it softer.

Water softeners work by exchanging the hard minerals for sodium. This is done by passing hard water through a tank filled with resin beads. As the hard water passes through, the resin beads create an ion exchange between calcium/magnesium and sodium. The softened water then exits the tank and is ready to use.

While a water softener is great at removing minerals from hard water, they do have some minor disadvantages.

Aside from the initial cost of purchasing and installing the water softener. Some regular maintenance will be needed, most notably in regards to salt. Water softeners must be regularly filled with salt, or they will not be able to function properly to create soft water.

Use a Reverse Osmosis System:

An RO system filters hard water and removes minerals, leaving you with clean, low TDS water. This is the best option for your car wash business. Reverse osmosis systems can remove up to 99% of dissolved solids.

Reverse osmosis works by using a high pressure pump to increase the pressure on the hard water side of the machine. This forces each water molecule across a semi-permeable membrane, leaving almost all of dissolved solids behind.

The biggest disadvantage is the cost. Reverse osmosis systems can be quite expensive, both to purchase and maintain. They also require a fair amount of space, so if your car wash is limited on space, this may not be the best solution for you.

Are There Any Alternatives to a Water Softener?

Hard Water Detergents

If a water softener is not an option you can use detergents that are designed for use with hard water.

They contain solutions that help prevent the calcium and magnesium ions from binding to the detergent molecules. This results in less scum and fewer spots on dried vehicles.

While not a perfect solution, hard water detergents can be a good way to deal with hard water if soft water isn't an option.

Water Conditioners 

Water conditioners work by changing the structure of the water molecules. It does this by passing the water over a specialized material known as template-assisted crystallization (TAC) media. This causes the hard water minerals to form "seed crystals".

This helps to minimize spots and scaling but does not remove the high concentrations of minerals.

The main disadvantage of using a water conditioner is that it does not remove the minerals from the water. You will still have hard water, and some of the problems that come with it.

While water conditioners are a good temporary solution, they are not a long-term fix for water softening.

Does Water Pressure Matter at a Car Wash?

Yes, water pressure is important for several reasons.

First, high pressure helps remove dirt and grime more effectively. It does this by breaking up the particles so they can be rinsed away more easily.

Secondly, less water pressure can lead to hard water spots. This is because the water is more likely to cling to the surface of the vehicle and dry, leaving behind magnesium or calcium deposits.

If you are having trouble getting enough pressure at your car wash or start to notice problems, there are a few things you can try.

1. Check for leaks in your system. A small leak can reduce water pressure significantly.
2. Make sure all of your hose connections are secure. Loose hose connections can also cause a drop in pressure.
3. If you have an older car wash, the pipes may be too small. This can be remedied by upgrading to larger pipes.

Choosing the Right Car Wash Supplier

If you suspect you have hard water the first step is to seek guidance to ensure your business starts on the right foot. We suggest getting in contact with a reputable partner like Turtle Wax Pro or Transchem.

Working with a company like us at Transchem gives you access to a team of experts that can offer guidance and support on choosing the best solution for your business.

We have been working with car washes for decades and take pride in helping washes succeed in any way we can!

This means choosing not only the right system to tackle your hard water, but choosing the right chemistry to match.

Hard water is a very common problem and as a result, we have the experience and expertise treating hard water to help you choose the best system for your business.

By taking these steps, you can protect your car wash from the damaging effects of hard water. Starting with the right water is the foundation to achieving the cleanest, direst and shiniest cars.

As always, if you have any questions regarding your water quality, do not hesitate to contact us!

Water spots on a vehicle can be a real eyesore.

Not only are they ugly, but they can negatively impact your car wash's success.

We at Turtle Wax Pro have decades of experience supporting operators within the car wash industry, and understand how challenging and inconvenient those water spots can be.

Today, we will discuss the best methods for removing hard water spots from a vehicle, for both the home washer and the professional car wash.

What are Water Spots?

Water spots are caused by minerals dissolved within water remaining on a vehicle's surface after the water dries. This is especially the case for hard water, which is water that contains high levels of minerals. When hard water dries on a surface, the minerals are left behind and can create stubborn water stains.  Soft water on the other hand does not contain as high levels of minerals but can still leave water spots, especially if the vehicle is not dried properly.

How do Water Spots affect cars?

Water spots can be harmful to cars because in extreme cases, they can etch marks into the vehicle's clear coat, causing damage to it.

Water spots can also make it difficult to completely remove other dirt and debris off of the vehicle.

Ultimately, they worsen a car's appearance, even right after getting a wash.

Customers expect their car to look shiny and clean after they get their car washed, but if they see a bunch of spots, they will not be pleased.

How to remove water spots from car?

There are multiple methods to remove water spots from vehicles.

First we'll cover the DIY method we believe works the best, then professional options for car wash business.

DIY

A popular DIY method is to use a white vinegar and water solution.

To make this solution, mix one part vinegar with one part water. Then, apply the solution to the water spots using a microfiber towel or sponge.

Let the vinegar sit on the spots for a few minutes before rinsing it off with clean, distilled water. You may need to repeat this process a few times to get rid of all the spots.

Pro

If you are a professional, you have access to more powerful chemicals and tools that can operate as water spot removers.

We recommend using a car wash presoak or other formulations that will help break down the minerals' adhesion to the vehicle. A final rinse with purified reverse osmosis water will remove any remaining water that has dissolved solids (which could dry and leave future water spots).

A detailing shop can utilize even more hands-on approaches: for more stubborn and older spots, you can use a clay bar or a polishing pad.

These products will get rid of the water spots. However, you should be careful not to damage the body panel while using these products.

Vinegar can still be used in conjunction with these options.

Items you will need to remove water spots from a car

A professional car wash harnesses chemistry, reverse osmosis water, and powerful car wash equipment to remove and prevent hard water spots after the wash.

Thus, we'll focus on the home car washer.

Distilled Water

Distilled water is water that has been filtered to remove impurities.

It is the best type of water to use for rinsing as those water spots were originally formed by water that had minerals in them.

White Vinegar

Vinegar is an acidic liquid that can break down minerals. As, established, it is a popular choice for removing water spots as it is relatively gentle and will not damage the paint on your car.

Spray Bottle

A spray bottle can be used for the vinegar and water solution you can create to combat those tough water spots!

Sponge or Microfiber towel

You will need something to first wet the car's paintwork.  

Car Wash Detergent

You will want to wash your car first, to get rid of the dirt and swirl marks currently on the vehicle, allowing you to focus on those water spots.

Step by Step

1. First, wet your car, especially over the area with the markings with a sponge or microfiber towels. Take notice if ringlets appear around the spots or it feels rough, this indicates the more severe form of mineral deposits.
2. Next, wash the car using your car wash soap of choice to remove road grime and dirt. If your water spots are new, its possible they will come off in this stage.
3. Mix equal amounts of vinegar and distilled water in a spray bottle, and apply the solution to areas with water spots.
4. Allow the vinegar to sit on the hard water stains for a few minutes.
5. Rinse the area with a garden hose and wipe off the mineral deposits.
6. For best results, rinse with distilled or reverse osmosis water before drying.

If you want to prevent water spots, here are some things to note:

Acid Rain

Acid rain can leave an unattractive look to vehicles, especially on glass.

Try to keep your car in a garage or covered when possible to avoid getting these spots on your windows.

Direct Sunlight when Wet

When your car is wet and in direct sunlight, water spots can form quickly as the water evaporates.

If you cannot avoid getting your car wet and being in the sun, try to dry it off as soon as possible by using a drying towel or cloth.

Sea Air

Cars that are regularly driven near the ocean will experience more water spot formation due to the salt in the air.

Wash and dry your car more frequently if you live near the ocean to avoid these spots.

‍

Q&A: Here are some common questions that you may have regarding water spots

Are water spots permanent?

No, hard water spots can be removed with the right method.

A number of different methods will work such as professional car wash products or regular white vinegar! Most car washes will remove car washes as part of the presoak application, and during the final rinse, will use softened or reverse osmosis water that will prevent more spots upon drying.

Will using vinegar on my vehicle damage the surface?

No, white vinegar is a weak acid and will not damage your paint or clear coat. In fact, a water and vinegar solution can be used as a polishing agent, and can be a great solution for removing water spots from home.

However, you should avoid using it on aluminum or chrome surfaces as it may cause corrosion.

Can water spots damage a car's paint?

No, water spots will not damage the paint on your car.

However, if you allow them to sit for a long time without cleaning them, they may make etch marks into the clear coat which will then require polishing or buffing to remove.

‍

Professional Car Washes and Hard Water Spots

Is hard water bad for car washing?

Yes, hard water is bad for car washing as it can leave spots on your paint and ruin the quality of your wash! The mineral deposits in the water can cause all sorts of trouble for car wash equipment, efficacy of chemistry, and the end results on the vehicle.

How can I fix my hard water?

The best way to fix hard water is to use a softener or reverse osmosis system... or a combination of the two. We have a guide that will walk you through your possible courses of action against hard water.

Hard Water Spots impacting your car wash success? Contact Turtle Wax Pro

As mentioned, water spots can really ruin the end result an otherwise great car wash, and is something your business will want to resolve.

Spraying cars with vinegar is a great at-home solution, but the professional car wash has more powerful options through chemistry that wash off spots, as well as road grime and other unpleasant residues on the vehicle.

Using chemistry that's tough on inorganic materials will help do the heavy lifting against the mineral deposit buildups found in water spots. Finally, a reverse osmosis final rinse will make sure new spots don't form on the car's surface.

Turtle Wax Pro has some of the best chemicals in the industry and can help your car wash handle even the toughest of cleaning challenges, including dealing with inconvenient hard water spots, and help prevent new ones from forming too.

Contact us today to learn how Turtle Wax Pro can help your business shine!

Introduction

TRUE-VUE 2 is a chemical management system that prioritizes its users by maximizing and optimizing your chemical operations. TRUE-VUE 2 is a system created by Transchem for the Turtle Wax Pro brand, meaning it pairs perfectly with Turtle Wax Pro's hyper-concentrated chemicals.

Our chemical management system was designed to be compact and easy to use which ensures it's both easy on your employees and on the eyes. The deluxe model also gives any car wash the ability to monitor their chemicals with real-time data. These advantages can take any car wash to a new standard of consistency and reliability while minimizing time spent in the backroom.

History and Development

TRUE-VUE was launched in 2018 to revolutionize the backroom of car washes.

The system was designed with several goals in mind to solve many issues prevalent in car wash backrooms all over the world.

Containment

Smaller jug size was a major focus for TRUE-VUE 2 as it would improve health and safety standards for employees.

Chemical Usage

Traditionally, draw testing methods are used to see the chemical usage and what is left in a chemical tank. TRUE-VUE 2 was designed to make the process less time-consuming, without the need for equipment.

Remote Access

The need to be physically present was a major barrier TRUE-VUE 2 intended to break through with remote access technology.

Development

Developing TRUE-VUE 2 was a complicated process as it needed to cross into new territory in multiple aspects while still being a one-size fits all system that could work seamlessly.

Two main challenges that had to be worked through in the development process were perfecting the installation and the operation process to be used in any type of car wash anywhere.

Features

TRUE-VUE 2 carries many unique benefits that ensure an improved backroom space for your car wash.

Standard Model

The Standard model is safe, simple, and secure which makes it a great addition to any car wash needing some reliable chemical organization, backroom optimization, and peace of mind. TRUE-VUE 2 transforms any ordinary backroom into a well-utilized, efficient, and attractive system where all of your chemicals can live.

The chemical tanks stack along the wall which opens up desirable and much-needed space within the backroom. They also feature easy-to-see volume markings along with a snap closure lid which prevents spills. Possibly the greatest benefit is the drop-and-go loading system which makes it a breeze to refill the tanks with the desired car wash chemical. This makes the process much easier on your employees and prevents injuries and messes.

Deluxe Model

The deluxe model offers all the features of the standard model and the ability to monitor your chemicals in ways that bring your car wash into 2023.

The deluxe model allows you to see real-time data for any number of car wash locations from any device with internet access.

That includes access to visual dashboards that showcase:

• Monitoring ability for up to 22 tanks per location
• Current and historical data for average cost per car, average usage per car, chemical cost per period, and wash counts
• Actual versus expected daily usage and costs
• Ability to export data into other formats and reports

Additionally, the deluxe model has automated alerts which notify key users on low tank levels, overfilled tank levels, unexpected usage and abnormalities, the tank being loaded, and the ability to notify your staff.

These benefits present unmatched control over your chemicals along with significant information that can help you identify patterns and improve operations.

New Features - Effective November 1st, 2022*

These new features have been effective in all deluxe TRUE-VUE 2 models since November 1st, 2022.

TRUE-VUE 2 has been given a brand new portal that presents a variety of new benefits for users. All while now giving us the right to own all of the data being gathered rather than working with a third party.

One of the new changes is the installation process. Our service team now has an app where your TRUE-VUE 2 system can be tested on-site to mitigate any installation problems found after the fact.

Other changes and updates include product use analysis which shows a blended cost per car, and floor inventory tracking. The tracking is automatic and deducts or adds inventory as you use and receive products. Finally, manual chemical reordering can be done from within the portal.

Implementation into Car Washes

Implementing TRUE-VUE 2 is a simple process for car washes. It has been created in a step-by-step procedure to ensure little to no issues and a smooth experience.

After an agreement is signed with a car wash, the needed tanks and racks along with our experienced service team are sent to the location where they install and test the system.

TRUE-VUE 2 Training and Support

System training is done at the time of installation by our service team. They are happy to answer any questions operators may have and help them become acquainted with their new monitoring system.

Tank Training

Training related to the tanks will be conducted to ensure a thorough understanding of the drop-and-go loading system.

Portal Training

If the deluxe model is chosen, operators will be trained on how to use the monitoring platform to view their tank levels, set up alerts, manage inventory and more.

Support

Both onsite and virtual training is available upon request for service, maintenance, and troubleshooting.

In addition, users can contact our operational support team through the TRUE-VUE 2 portal or directly email truevue@transchem.com for any questions or requests related to the system.

Turtle Wax Pro Products

TRUE-VUE 2 is designed to work with Turtle Wax Pro chemicals and car wash products. Everything from your car wash soap, presoak, surface protectants, drying agents and any other product you use can be used with TRUE-VUE 2 to make your loading experience easier and monitor its use in real-time.